top of page
ONE SEVEN OSP-24i-T
Portable Precision in Action: The OSP-24i-T Electric Direct Injection Foam Proportioning System
Highest dosing accuracy with zero calibration effort. Supplies up to 6 nozzles simultaneously with wetting agent – flexible, automatic, and fail-safe. When using appropriate foam nozzles, heavy foam and medium foam can also be produced.
Certified Quality & Maximum Reliability:
In accordance with DIN EN 16327 (DZA 2400/0.1-1.0)
IP65 protection rating (fully protected against dust and water jets)
Quality Management ISO 9001 & ISO 45001
Made in Germany (Luckenwalde) – 25+ years of CAFS technology leadership
Comparing inline inductors & OSP-24i-T
Venturi Proportioner Principle | OSP-24i-T Proportioner |
|---|---|
High pressure losses in the hose system
| Maximum pressure loss of 1.0 bar
|
Inaccuracies Due to Temperature Fluctuations | Automatic adjustment in response to changes in the foaming agent using modern sensor technology
|
High foaming agent consumption | Economical proportioning rates starting at 0.3% (Class A) |
Manual calibration required | No calibration effort necessary - fully automatic control |
TECHNICAL HIGHLIGHTS OSP-24i-T
Technical Data OSP-24i-T
TECHNICAL DATA | |
|---|---|
Nominal flow rate | 100 ... 2.400 l/min |
Pressure loss | Max. 1.0 bar (at nominal flow rate) |
Proportioning rate
| 0.1 ... 9.9 %, steplessly adjustable |
Flow rate | 0,3 ... 24 l/min bei 10 bar |
Voltage / Power consumption* | Max. 60 A (at max. working pressure) |
Dimensions / Weight | 697 x 382 x 442 mm / approx. 45 kg (IP65) |
*Dependent on type of foaming agent
Connections OSP-24i-T
bottom of page